Replacement diagram for 2003 zx2 ford escort fan

2003 Ford Escort ZX2 Audio Wiring Chart

MODIFIEDLIFE https://www.modifiedlife.com > 2003-ford-escort-zx2-...
Our 2003 Ford Escort ZX2 radio wiring diagram shows you all the radio wire colors and what they do. Table of Contents. 2003 Ford Escort ZX2 Radio Wiring Diagram ...

2000 Ford Escort ZX2 Car Stereo Wire Colors and Locations

The12Volt https://www.the12volt.com > installbay > stereodetail
2000 Ford Escort ZX2 Stereo Wiring ; Antenna Trigger, n/a ; Antenna, Right Rear ; Front Speakers, 5 1/4" Doors ; Left Front (+), Purple ; Left Front (-), Blue/Orange.

Ford Escort Stereo Wiring Diagram

Pro Street Online https://my.prostreetonline.com > 2016/03/10 > ford-es...
Mar 10, 2016 - The Ford Escort was available through three generations, and today I'll be showing you our Escort stereo wiring schematic from 1980-2003.

The picture is for a zetec. Let me know if wrong diagram?

Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

http://www.2carpros.com/forum/automotive_pictures/99387_esc_1.jpg

Click on the following free direct Link. It has the Serpentine Belt Diagrams for your 2003 Ford ZX2. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2003/make/ford/model/zx2/2003_ford_zx2_drive_belt_routing_diagram.htm

see diagram on hood or fan guard

The tensioner is between the a/c compressor and crank pulley, below the power steering pump. Use a 13 mm wrench to 'tighten' the bolt in the center of the pulley and it'll move to release tension off the belt.

This information can be found at www.serpentinebeltdiagram.com
They have all the belt routing info for any vehicle with a serpentine belt.
Hope this helps....

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine

surpintine belt diagram for a 2000 ford escort zx2 16 valve