How do you remove a power steering pump out of a 1997 chevy suburban and reinstall it?
For step by step instruction, you best pick up the auto repair guide.
Steering pumps, in general, are not very difficult to replace. Pay careful attention to how you take it apart. Use a camera to help you remember how things go.
You will need to remove the drive belt...it rotates all the accessory pulleys, including the steering pump.
The pump should only have two or three bolts holding it on. Make sure you have a hose clamp, or something clean, to catch the steering fluid when you remove the hose.
Make sure not to over or under tighten the hose clamps when reinstalling it. Start snug...then check for leaks, and tighten if needed.
Good Luck.
Give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your baby SUV wish you the best of luck Michigan Man.
1,148 views
Usually answered in minutes!
×