Identify which belts need to be replaced. If you are replacing the air conditioner belt, you may need to remove the alternator belt because of the way the belts are shared on the crankshaft pulley. As a result, some mechanics recommend replacing both belts together.
SOURCE: any special tools needed to
you should be able to loosen the alternator and get the belt off and then put the new one on and tighten the alternator back up. check the fuses for the cigarette lighter
SOURCE: is there a special tool needed to change the serpentine belt
There is a special tool for removing your serpentine belt. It is a long thin bar designed to get in those tight spots. Most auto parts stores have these bars. Good luck. please rate my answer as a fixya!
SOURCE: serpentine belt replacement
You will only need to locate the fan belt diagram to replace it on correctly and a 1/2 breaker bar or ratchet to back off the tension er while replacing belts check the tension-er bearing if it feels ruff when you turn it replace it. Check water pump also to see if it turns smooth same with the alt.
SOURCE: My valve cover is leaking. Do I need any special
ANSWERS to Both is NO if you have Minimal Skills you can Do it Yourself
SOURCE: HOW DO I REPLACE THE SERPENTINE BELT ON MY 2.8 V6?
joecoolvette must not ever been near an A4 Audi. Although his outline of the serpentine belt change is correct, you can't get to on an A4. Check out AudiWorld Tech Articles, Chris Hansen has a nice post there on Serpentine Belt Tensioner Replacement that would address most of this question.
674 views
Usually answered in minutes!
×