SOURCE: my gas tank door will not open with th release switch in my car
I had the same problem...brought it back to the dealership (had an extended warranty) and they just made an adjustment. No problems since!
SOURCE: i have a subaru legacy outback, abs light comes on
one of your abs sensor is bad or the abs motor,go to local shop to diagnose which sensor,shop usually charge $ 60 to diagnose abs system,good luck, let me know ..
SOURCE: 99 subaru legacy outback w/2.5 L boxer engine.
This code is associated with the EVAP system which includes, but not limited to gas cap, fuel lines, carbon canister, purge valves. The EVAP system is supposed to prevent fuel vapors from escaping the fuel system
If you have this code, one of the following may have happened:
Gas cap not installed properly or faulty gas cap
Purge solenoid has failed
Canister is plugged and not working properly
This code can be tricky to resolve, but try some of these:
Remove and reinstall the gas cap and or replace the gas cap and clear the code and see if it comes back
Inspect the the hoses, and tubes for any sign of a hole or cut
Inspect for damage or disconnected hoses around the purge solenoid
Check and or replace the sensor
Check and or replace the purge valve
SOURCE: Check engine light on. P0325, P0420 2000 Subaru
CODE PO420 CATALYST SYSTEM EFFICIENCY BELOW THRESHOLD BANK I * CODE PO325 KNOCK SENSOR NO.1 CIRCUIT MALFUNCTION BANK NO.1 OR SINGLE SENSOR
121 views
Usually answered in minutes!
×