Need a serpintine belt routing diagram for a 2000 pontiac Montana

Usually the belt diagrams are under the hood or near the radiator in many cars. However, if you type "2000 pontiac montana belt routing" into Google, you will find the diagram.

Need to know the year and make of the vehicle .

pulley on which belt is routed is worn out or belt is not original.But original parts and see if that makes a difference.Or the belt is not getting routed properly.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

The serp belt tensioner will be in between the alternator and the power steering pump. Use a 3/8 ratchet and insert it into the square hole of the tensioner. Rotate the tensioner to remove the tension from the belt.

It doesn't hurt to draw a picture of the belt routing before removing the belt. Most GM's will have a diagram of the belt routing. I think yours is located on the plastic cover that is near the water pump.

If you don't have a diagram the belt is routed like this.

From the crank pulley the blet goes to the a/c compressor then under the water pump pulley then over the power steering pump and the alternator. then down to the p/s pump, over the tensioner pulley and finally ending up at the crank pulley.

Let me know if you have any question and I'll be happy to help. Thank you for using fixya.com!

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

try to locate diagram of belt routing - Google "2002 Pontiac Montana (your eng.size) belt routing diagram" then click over to Google images. I know the belts run close but shouldn't be contacting anything but pulleys and idler

check the fan belt to see if its glazed from slipping,if it is you can spray some stuff on it called belt dressing,if yhat doesnt work you will have to adjust it or replace it.

The serpentine belt diagram for 2001 aud A6 Quattro 2.8 liters V6 engine:


CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

I can't upload pictures but you can see one at auto zones site just lookup your car for belts and click on diagram when you find the right belt. Gates belts have the diagram on the sleeve for the engines the belt your buying fits. There is also a diagram on the top of the fan shroud, or on the belt cover above the water pump if it's the 3.1

You can find one at autozone.com, you may have to sign up for a free account, but you can view the job diagram there. It looks like for a 6 cylinder, there are two belts, one goes from the crank pully around the water pump then the alternator, and the other goes around the crank shaft then the power steering pump and then the air compressor pully. The power steering and air is a "v" belt and the other is a ribbed serpentine belt. they both just wrap around no wierd routing. the only thing I do not see is the idler pully or tensioner pullys.

OK, click on the link below to be directed to a full size photo of your belt routing diagram.

2000 Grand caravan Serpentine Belt Routing

Please rate and have a great day:)