I lost my philips business rds code from my z3

with the pre-set station keys, press 1 then then use channel up/doun to select correct digit..

then press 2 use again channel up/douwn key to select correct digit, repeat same with 3 and 4, then press pre-set key 5 that puts in the code,DONE!

O.K.?

hi,
i gotta new car and the stereo not connected and i dont have the keycode for "6000 RDS E-O-N" Please help me
Part No. 98KP-18C815-CA
Ser No. M024904

go to dealer supply proper docs should be free

the dealership can help give them your vin# and they may want address and name etc just to verefy your the owner then the will give you the code

I have a Ford 5000 RDS-EON.
I need a KEY CODE.
The serial number: M344718.

Thanks a lot.

yes the light is because of the gas cap being gone (sets code in evaporative emissions system), replace the gas cap, disconnect the battery for five minutes and that will turn of/reset the light, make sure u have the radio code before u do this, if u don't u will have no radio after the battery is disconnected..

press rds and fm1/2 together and hold it til your radio indicates the numbers 0000 then enter your code using the buttons 1234 keep presssing the number one til u get the first digit of your code then go on to the next number and so forth. once you get the code in press rds and fm1/2 again til lthe radio automatically turns on.


This solution is close, but not accurate for my 1998 A4 2.8. You press and hold FM2 and RDS until the display indicates 1000. Immediately release. Then enter code with radio numbers 1 through 4, pressing each one till you get the first no. of the code, then for 2, press till you get second no. of code, etc. The press and hold FM2 and RDS until radio comes on.


Press & Hold RDS & TP at the same time , display will flash enter your correct code then press and hold RDS & TP together to save the code. Radio will be unlocked after that if the correct code is entered

Enter the 5-digit Radio Code using the radios station preset buttons. After entering the fifth digit press the > button and the radio will activate. Any presets you had before the power loss will return. Apparently a capacitor in the radio holds that information

Yes. If it was bought in the US, it was coded for the US, so have a US dealer provide the code.

This solution is close, but not accurate for my 1998 A4 2.8. You press and hold FM2 and RDS until the display indicates 1000. Immediately release. Then enter code with radio numbers 1 through 4, pressing each one till you get the first no. of the code, then for 2, press till you get second no. of code, etc. The press and hold FM2 and RDS until radio comes on.