Engine light and ABS traction control light remain

My 2000 Chrysler 300m the intake on the engine loose how do I replace it and my check engine light is on show me a diagram.

Likely a wheel sensor failure. You would need to plug into a diagnostics scanner to see what was recorded.

ABS stands for anti lock brake system.
TCS stands for traction control system.

I recommend having your abs system diagnosed for faulty sensors, control module, etc. With the abs light on the traction control system is designed to disable because it utilizes the abs system to automatically help control your vehicle in loss of traction situations.

with traction control set up cars abs and tranction control sensors are in the wheel bearings when a wheel bearing goes out grinding will come from front wheels and will ruin abs and traction control sensors causing the malfunction. Most likely by your description this will be it.

sounds like your abs trac control module is going its located on the front drivers side behind wheel well cover , 850 for new best to pick up from junk yard about 100. module changed in 2002 . make sure you get right year .mine went lost all break fluid no warning canister rusted out.

had my 2000 chev impala 3.8 liter ,traction control llight and abs light both go on the reset it and go right back on .so i replaced both sides of the bearing hub assembly this is connected the senser,so far so good.replaced it dec 21 2009 about 3 hours ago. because the assembly came appart when took off.

IF YOU ALREADY HAVE THE ABS FIXED THE LIGTH AUTOMATYCALY TURNS OFF BUT IF THE ABS IS STILL UNABLE THE ABS LIGTH AND THE TRAC OFF LIGTH WILL REMAIN ON

You computer is not functioning correctly and is going to cost you over 700 dollars to replace. :) Have a nice day

Sounds like you have a bad wheel speed sensor. You need to have it scanned. Since it's been sitting, it might just be a bad connection to one of the speed sensors.

Climate control is the heater/a.c. systems. Multi-Point fuel injection is the type of fuel system the car has. Vented brakes have holes in the rotors to help cool them during heavy braking. Immobilizer is the anti-theft device. Electronic traction control will transfer the power to the wheels so it doesn't slip or loose traction. ABS is Anti Lock Brake system. This is so your brakes doesn't lock up during hard braking. No. 7 is the suspension system for a good ride and cornering. Not sure about No. 8 though.