How to adjust a hydraulic clutch mazda protege 01 2 0L? or how do i change it by my self if the adjustment does not work?

Hi Deanne there is no adjustment possible on hydrolic systems. The self adjust every time you operate the pedal. Regards Jim...

This year and model uses a Hydraulic clutch release system, all hydraulic clutches by design are self adjusting. If you have a hard pedal or a slip problem you need to replace the clutch disk and pressure plate.

All hydraulic, probably slave cylinder going bad otherwise master cylinder

The whole idea behind the Hydralic Clutch is there is no adjustment.If the clutch is slipping then you need a new one.If you are having trouble getting it into gear then you may have a bad clutch master and or slave cylinder.Let me know if i can help.

Vladimir Surgay continue: In reverse it works fine, very well... Not in forward...

dont think so because its hydraulic operated .renew clutch time ,

u do not have a clutch cable, the system uses a hydraulic clutch release, it is self adjusting, when the clutch starts to slip or engage high on the pedal the clutch is worn out, average cost to replace this clutch isw around $600 on this SUV

on 92 models they have no ajustment,they have automatic hydraulic lash adjustment.only time youll have problems is if oil level is low or camshaft is worned out!

Sorry, there are no adjustments on your vehicle., The clutch is activated via hydraulic pressure. The master and slave cylinders are "self-adjusting". If the clutch is slipping, you are going to need to pull the trans and replace the clutch assembly. Changing the hydraulics will not help a slipping clutch at all.

Thanks for choosing FixYa for advice!

One comment there is no clutch adjustment, you clutch is hydraulic and it is self adjusting.