SOURCE: Torque Settings on a 1994 BMW 318i?
The torque settings is more know as torque spec's, and it just means an exact measurement of how tight a paticular part is tightend. With a new engine, many differnt parts have differnt specs, but hands down the single most important thing would be the cylinder head to engine block torque. This is often done in a 3 step process, using a torque wrench, and a torque angle gauge. Are you planing on installing an engine yourself? I can get specs for you.
SOURCE: how do i change the torque settings on my bmw e36
Hi unsure what you mean by change the torque settings, if you mean on the head question is why? If yes for head, there is a tool for that & go to Download PDF search | PDFTown.com
for more info
SOURCE: orginal clutch mark for bmw 318is e36, year 1993
Hi can you give us more detail regarding the original clutch mark. Are you trying to replace the clutch plate?
SOURCE: Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36
BMW cylinder torque setting all models
According to my service manual as follows.
Cyl head to engine block (torx e12 M10 bolts)
Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees
Cyl head to lower timing chain cover 10nm (89in – lb)
The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.
SOURCE: cant find fuel pump in a BMW E36 318i 1993
Have you checked inside the fuel tank??? most are sitting on top of the tanks... that maybe located under your rear car seat! not too sure though!...
768 views
Usually answered in minutes!
Torque setting for what?
what ones?
×