2001 Volkswagen Beetle Logo
Anonymous Posted on Jan 06, 2010

Ok I?m getting a p1297 code and then I?ll start getting po301 If I erase the codes then start the car and let it idle ill get the po300 po301 po302 po303 Then drive the car ill get the p1297 If I erase then drive ill get the p1297 first then the po301 and so on I?m looking for a vacuum Leak but can?t find one I?m changing the coil packs around but it isn?t changing anything the car Drives great but has a slight miss at an idle can anyone give me a clue as to what to look for or What to do next it?s an 2001 VW beetle 1.8 turbo

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 962 Answers
  • Posted on Jan 06, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Oct 26, 2008
Answers
962
Questions
1
Helped
478309
Points
2866

Clean the EGR valve seat. The EGR may have become stuck. A good way to check for vacuum leaks is to use smoke near every intake vacuun hose . And near the intake manifold. The valve will **** in the smoke. If you clean the EGR valve and it still misses. Replace it. The EGR can cause random misfire.

Testimonial: "ok ill give that a try i never herd the smoke test before but i like it sounds like it will work"

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Aug 08, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 09, 2011
Answers
1
Questions
1
Helped
2412
Points
1

All that has been done, replaced egr valve still has codes PO 171 PO 300 01 02 03 and P1297 any other cures

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

What are code po100 .po394.po400.po302.po301.po700.po300.po130/ po150

If you are getting all these codes your best and safest option is to take it to a good mechanic. These codes are for lots of different problems like misfires and EGR issues.
1helpful
1answer
0helpful
1answer

2003 acura tl error codes po301 po302 po304 po306 p1399 po300

PO300 and P1399 are random cylinder misfire detected.
PO301 cylinder 1 misfire
PO302 cylinder 2 misfire
PO304 cylinder 4 misfire
PO306 cylinder 6 misfire
I would say that you have damage to the ignition wiring harness or you ECM is failing.
0helpful
1answer

2001 windstar im getting codes po172 po174 po301 po302 po 303 po304 po300 installed new coil pack twice new wires,plugs,cam and crank sensors,fuel andair filters,pcv valve and now get these codes. ...

Get your ECM replaced. Usually it's next to battery or inside front fenders. The rain must have shorted out connections and fried ECM. Engine will sputter until it is done. Usually autozone, advance auto, or dealer has ECM.
1helpful
1answer

2008chevy malibu misfire

Which code you have po300 or po301.po302 .PO301,PO302 will be coil or module.PO300 could be bad spark plugs,vac. leak,clog fuel filter,bad fuel pump,bad battery.
0helpful
2answers

02 hyundai accent engine quit running won t start codes come up po300 po301 po302 not familiar with 4 cylnders when turning over sounds like no compression

codes p 0300 is random misfires and codes p0301,2,3,4,5,6,7,8 are the cylinders that are misfiring
so un you statement the problem cylinders are 1 and 2
misfires are normally problem injectors and low fuel pressures so have the fuel pressure checked to make sure that the pump is running correctly, the pressure regulator is operating correctly ans the EVAP system is venting the tank correctly
use a couple of injector cleaner in the tank to clean the injectors
0helpful
1answer

Have codes po300 po301 po302 po316

its like you have cylnder misfire or more , did you check all the wire .plug if any one bad or the wire have fire , and you check if the fuel pump good . i would like to ask you that , Did the problem come on suddenly or was some previous action or work done......

0helpful
1answer

Audi 2000,1.8 turbo,code po300,po301,po302

P0300 - Combination misfire detected
P0301 - Cyl 1 misfire
P0302 - Cyl 2 misfire

If it has a lot of miles it needs a tune up.
Fill tank with high quality premium fuel
Check fuel pressure
0helpful
1answer

Po302 code,po301,po300

usually a p0300 is a random missfire code due to a fuel problem probaly bad gas , use some in tank fuel treatment such as techron or lucas injector cleaner, after adding fuel disconnect negative terminal to batt, to clear codes and see what happens
Not finding what you are looking for?

2,422 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...