Question about 2004 Ford Expedition

3 Answers

My steering wheel rotates back and forthYou can

My steering wheel rotates back and forth.You can let go of the wheel and it still drives straight, but you can see the wheel shimmy back and forth about 1", like someone is turning it back and forth really fast. Not as much vibration as there is the feeling of the wheel shaking

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

You need to verify that you don't have a low tire first,After that have the wheels checked on a spin balancer to check for a bent wheel,If you can't see a bend wheel problem,it will be a seperated tire or the steel belt shifted in one tire,You can rotate the tire to get that feeling out of the steering wheel until you replace ties.

Posted on Jan 09, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 317 Answers

You have a bad tire.....or tires...have them and rotors checked...but its probably the tires

Posted on Jan 06, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This was my problem as well. The experts were right. I went to have new tires installed and was informed that two of my tires had broken steel belts in the tires. I wish I would have known of this website months ago.

Posted on Jan 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I njust noticed my steering wheel in my 2000GMC 1500 is now rotated about 100 degrees when the truck is going straight. My mech. says tie rods and tierod ens are tight and everthing seems normal...he did...


a bad idler arm/pitman arm, You will have a hard time trying to keep the car going straight, it will wander all over the road.
  1. Road walking. When the vehicle wanders back and forth in the direction of travel and it is difficult to keep it straight.
  2. When sitting still, there is considerable play in the steering wheel. It can be moved considerably with no resistance.
  3. When sitting still, and with the front wheels off the ground, it is possible to move the wheels side to side without the steering wheel moving. If there is to much play in the steering wheel or side to side movement of the wheel when the vehicle is stopped could indicate there is a problem with the idler arm.

Apr 22, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

Four wheel drive will shake when turning


If all is fine when moving in a straight line - you are probably OK. Turning while in four wheel drive, especially a full hard over turn, puts a great amount of strain on the universal (or CV) joints of the steering axles. Although CV joints are smoother they too still have to supply power to the steering wheels at an angle while turning. If you have concerns about the CV or universal joints, jack up your vehicle, secure it with blocks at the wheels and put on jack stands, then inspect the joints checking for excess play. Rotate the front tires back and forth by hand while watching and feeling for unnatural movement or obvious broken joints. They may be difficult to see if covered with a rubber boot. If you do have boots, they need to be in good shape since they are designed to keep dirt out of the joint. If they are not in good shape, broken or split, they should be replaced. Let me know if this helps. Thanks

Feb 01, 2011 | Toyota Tundra Cars & Trucks

1 Answer

Play in steering wheel replaced upper and lower ball joints and out and inner tie rod ends. what next?


raise the truck and have some one rock the steering wheel back and forth while you look for excessive movement at the idler arm - also check is the input shaft on the steering gear box rotating more than the output(pitman arm side) i've seen more steering box failure in the last several years especially true with big tires or boggy road driving, a rebuilt box can be bought at a local parts store- o'reillys, advance, napa etc.

Nov 23, 2009 | 2001 Chevrolet Silverado 2500HD

1 Answer

Steering wheel turns more than the wheels turn. fight to keep straight


with engine off, have someone turn the steering wheel back and forth. Check under the hood along the steering shaft for loose u-joints. check the steering box, check joints at either end of drag link(from steering box down to passenter wheel) and tie rod ends. do this with engine off so wheels dont turn. and by the way, jeeps have sloppy steering boxes from the factory, so don't expect excellent, tight steering when you're done. good luck

Nov 17, 2009 | 1995 Jeep Wrangler

1 Answer

2000 Buick Century started pulling to the right on freeway.


if you hold the steering wheel straight ahead does the car move side to side or does the steering wheel fight you to move side to side.

Aug 24, 2009 | 1999 Buick Century

1 Answer

The jeep apears to be in park however the igmition


Could be a couple of things, the pin that locks the steering wheel could be failing to activate.

Try one thing, with vehicle parked, key off, take the steering wheel and rotate it back and forth a bit to see if the wheel locks at that point. I have seen some vehicles require that. (Manufacturer would not call this a problem if it does lock up after rotating the steering wheel.) May have to turn the wheel as much as 1/8 to 1/4 of a turn. (OK, 1/4 a turn is a bit much, but hard to gauge how much rotation you are doing.)

Aug 01, 2009 | 1997 Jeep Wrangler

3 Answers

'89 chevy k1500 sloppy steering wheel (HELP PLEASE)


Everyone always gravitates to the suspension but folks, it's 99% sure that it is the EVO. The EVO is the sensor built into the steering column that senses movement of the steering wheel then controls the power steering pump accordingly. When it goes out (which is all too frequently) you get sloppy and loose steering at lower speeds and it does tighten up a bit on the highway at higher speeds. This is the way it is supposed to work but when it fails it's downright scary trying to keep the truck straight on a narrow two lane road!

Jun 14, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Esp/bas light on, steering wheel off center after off roading


If your steering wheel is off center, this can cause the problem. Luckily this is very easy to fix -- you can do so even if you have little to no experience working on your vehicle.
1. Park the vehicle with the wheels facing straight ahead (drift forward until you are moving in a straight line). Don't worry about the steering wheel position. 2. Locate the steering drag link -- the diagonal rod coming from the bottom of the steering arm to the top of the passenger side steering knuckle (on the axle near the tire) 3. Loosen the two bolts on the rotating adjustment collar on this link. I believe these are 13mm. 4. Rotate the collar one way about two or three turns, check the steering wheel to ensure that the "Jeep" logo is perfectly horizontal. If it's not, continue rotating the collar (or move it in the opposite direction) until the wheel is centered. 5. Tighten down the nuts on the drag link adjuster. 6. Take her for a test drive and let me know how it worked!

Apr 06, 2009 | 2008 Jeep Wrangler

1 Answer

When driving i feel that the car is aqua planing on straight piece of road very light on steering the rack has been changed about 8months ago.


it sounds like you may have loose tie rod ends. which causes the front end to feel like it is floating. look under the front of your car at the steering linkages and have someone gently move the steering wheel back and forth. so you san see what is moving....dont forget wheel chalks!

Mar 23, 2009 | 2006 Renault Fuego

1 Answer

Steering Wheel Shakes/Rotates back and forth ~ 1" - Shimmy's?


did you ever let somebody check the wheel allignment, it may be the camber shaft.

Feb 26, 2009 | 2002 Ford Expedition

Not finding what you are looking for?
2004 Ford Expedition Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...