Question about 2000 Ford Windstar

2 Answers

P0302 #2 cylinder miss fire code. Replaced plugs and wires but at 40 mph runs very rough. Idles smoothly but not when put in gear.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1999 ford escort 2.0, its got a miss on cylinder 3 and 4. I changed the wires and the coil pack but its still missing. When scanned I get code p1506, p0303 and p0304

Posted on Jan 11, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 369 Answers

Check the coil for cyl #2 if its an individual coil youll be able to replace it by itself if its a coil pack youll need to replace the coil pack.

Posted on Jan 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shakes at 40 mph


Double check the ignition wires. It is easy to reverse a pair of wires by accident when they are being replaced and it will run as you describe.

Jan 05, 2014 | 2001 Dodge Caravan

1 Answer

Dead miss in cylinder 2


I would want to know if you have normal compression on all 6 cylinders, and if the other 5 are firing correctly.
Usually when you pull a wire and the engine smooths out, you have another cylinder miss going on at the same time.
How many trouble codes do you have in the computer ?

May 03, 2013 | 1997 Ford Windstar

3 Answers

What causes 2000 taurus engine rough idle but no codes


remove neg. cable from battery so the ECM will reset this may work. make sure the IAC is air tight. if this doen't fix your problem have someone check the IAC valve if it's bad the part runs $300.00 pluse

Nov 25, 2011 | 2000 Ford Taurus

1 Answer

I have a 1983 Porsche 944 that I just purchased. It had a bad miss when I got it. I have replaced the coil, plugs, plug wires, dist cap etc. I have now found that if I unplug the cam shaft sensor, it will...


hi rough running or not firing on all cylinders try tapping the injectors with a spanner a i had the same problem and it was asticky injector put inj cleaner inn fuel tank for nxt 3 fill ups no more problems

Nov 07, 2010 | 1983 Porsche 944

1 Answer

Replaced complete distributor and now cylinder


Yes it is possible to be a tooth off or more and still run but if one cylinder is misfiring then it may be a bad plug or plug wire pull that plug and see if it is worn out and try replacing the wire first. if the plug has a wide gap that can cause it to misfire. you may have a bad injector too but don't know for sure. This is one of them questions that need to be looked at physically to know for sure.

Mar 25, 2010 | Chevrolet Astro Cars & Trucks

3 Answers

Engine code 306 on a 2005 stratus with a 2.7 engine. i replaced plugs but still idles rough.


This code is for cylinder #6 you have a coil that is bad on that cylinder

Jun 06, 2009 | 2005 Dodge Stratus

2 Answers

Runs rough, misses, sometimes then clears up.


You have a cylinder misfire. You need to check the distributor, wires, and pull the plugs because something is not firing the fuel mixture in one or more of your cylinders at timew. you can do the plugs yourself for the most part. I dont know how the 6 cyl looks in the engine compartment of the wrangler, but from my experience with a 96 XJ, number 6 cylinder is very difficult to get to because of the interior air intake vents. if all the plugs seem fine, you may want to take it into a shop for a distrubutor and wire check

Jan 24, 2009 | 1994 Jeep Wrangler

1 Answer

2002 Ford Focus


you will have to read the diagnostic code that the computer is sendig for the check engine light to activate

Sep 30, 2008 | 2001 Ford Focus

Not finding what you are looking for?
2000 Ford Windstar Logo

1,815 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...