- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
normally the cam/crank position sensor is the main source of control for the injectors as the cpu has to know the piston position before it allows any fuel into the cylinder for ignition Have the fault codes read. Replace faulty items. Use only genuine items as non-genuine replacement are not always compatible with the OEM fitted CPU units.
engine oil is depended on where you live in cold countries a thiner oil is recommended so it does not stiffen in the sump from the cold in hot countries a thicker oil is recommended so it maintains performance at hotter tempretures. for transmission it is best to speak to a local dealership as there are several types on the market and in both cases you may wish to use synthetic apposed to mineral oils.
A 10w-30 is sufficient. Dont go crazy buying the most expensive oil on the market, also dont use synhetic.
look for an oil with an sh,sg or a sh/cd rating. these ratings are from the american petrolium institute so there all the same.
happymotoring
remove back wheels with screendriver adjust handbrake remove rubber plug from disc brake rotate disc brake down and look inside the disc with light;ask other people with ML (mercedes) ,JEEP,GM
could be several problems either a defective guage,a loose wire or a bad sending unit which is in the tank itself and requires a fair amount of work to replace. please rate this solution
×