LCD screen contrast problem

SOURCE: reset oil maintenance light in

1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.

1. Continue to press and hold the button until the trip meter displays 000000.

1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.

SOURCE: Computer warning Oil maintenance 2008 Highlander Hybrid

Please email me on [email protected] and I will email you the procedure in printed matter.

Cheers

Marvin

• 85242 Answers
• Posted on Jun 17, 2009

SOURCE: code p1135 what wrong help,toyota 2000,highlander

That code is specific to the Air-Fuel Ratio (A/F) Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)

P1135 Trouble Area:
 Open or short in A/F sensor (bank 1, sensor 1)
 A/F sensor (bank 1, sensor 1) heater
 ECM __________________

SOURCE: How do you replace the

remove the screws in the tail light housing. Either there will be 4 screws on the outside holding the housing, or there will be two plastic wing nuts on the inside behind the rear liner. Oce the screws or nuts are removed, then you can gently pry off the plastic tail light lens.