I have a 2001 Hyundai Elantra. When I turn on my

ck out this video.....

https://www.google.com/search?q=2010+Hyundai+Elantra+Touring+SE.+The+windshield+wipers+have+started+to+stick+in+the+up+position&newwindow=1&sxsrf=APwXEdefiRW3DeKeoKKilJZICFHwT3iyig%3A1683320399048&source=hp&ei=Tm5VZNnmPNCcptQPk96C6A0&iflsig=AOEireoAAAAAZFV8X1vFtlUCkfenDkKz79n8e8U3-8Cw&ved=0ahUKEwjZxbOTid_-AhVQjokEHROvAN0Q4dUDCBM&oq=2010+Hyundai+Elantra+Touring+SE.+The+windshield+wipers+have+started+to+stick+in+the+up+position&gs_lcp=Cgdnd3Mtd2l6EAwyBgizARCFBDIOCAAQjwEQ6gIQjAMQ5QIyDggAEI8BEOoCEIwDEOUCMg4ILhCPARDqAhCMAxDlAjIOCC4QjwEQ6gIQjAMQ5QIyDggAEI8BEOoCEIwDEOUCMg4IABCPARDqAhCMAxDlAjIOCAAQjwEQ6gIQjAMQ5QIyDgguEI8BEOoCEIwDEOUCMg4IABCPARDqAhCMAxDlAjIOCAAQjwEQ6gIQjAMQ5QJQvw5Yvw5g9iRoAXAAeACAAQCIAQCSAQCYAQCgAQKgAQGwAQs&sclient=gws-wiz#kpvalbx=_WW5VZM6nH7qnptQP-MSSkAM_40

The belt is lose most likey

If gauge still shows empty and light is on then inside tank there is a arm thats prob just stuck remove lower rear seat and will see entry to tank gauge has about 3 to 4 screws open and check if arm is down or floating .

It could definately be the wiper relay, and it could also be the wiper motor. If you put a long screw driver on the relay and have someone turn the wipers on with the key on, you should be able to hear the relay clicking as it opens and closes. Sometimes you can put your finger on the relay and feel the relay switching. If you can hear/feel the relay then the next step is the wiper motor. Hope this helps.

Hello Guest and thank you for asking your question, on Fixya.

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your 2001 Hyundai Elantra, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people in your exact situation.
How to diagnose your overheating 2001 Hyundai Elantra
I am thinking something more along the lines of a burned up engine. It is possible that the starter was damaged, though.

Get more great (money saving) tips and tricks about your Hyundai from: twitter.com/acoates23234
*FYI - You can get all repair information about your Hyundai straight from the manufacturer at: hmaservice.com - Sign up is completely free.

Thanks for the vote, and good luck!

blockage in pipe or screen jets

I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.

I did this last night and everything is working properly now.

check for any circuit brakers near the fuse box, if theres any of them reset them by introducing a paperclip in the small hole and press, you will hear a click.

A fuse DOES NOT control the low beam headlights... a RELAY does.

give the mottor a few taps and spray wd40 in it if you can it releases things thats stuck. also make sure all movable parts are moving freeely. sounds silly but can catch on things. cables are not squashed and the like.