The pump is located in the bottom of the washer fluid container,check to make sure all the hoses are connected first, sometimes when low on fluid the pump needs to be primed.if you need more help get back to me as i strive to be the best, Please rate my fix?
Testimonial: "Very helpful! Thanks"
Hi
http://www.realoem.com/bmw/diagrams/s/p/115.png
To test washer motor gain access to it by following the filler neck to behind the front of the front guard, remove the plug that connects to the motor and get someone to activate the washer switch. If test lamp lights up = faulty washer pump, if no lights then check fuses. You can also run separate power to the pump by running "jumper" wires diredt from battery to pump.
NB = Do not touch these wires or you will cause dead short = melted wires / burnt hands.
Testimonial: "Very informative and useful information. Thanks!"
Inside the inner wing ,thats where the motor is on the side of the bottle ,its either stuck or corroded doubt if its the fuse
Testimonial: "Quick response. Thanks!"
2,044 views
Usually answered in minutes!
×