At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Each tire manufacturer has different pressures for different tires, you will find this info on the sidewall of the tire, always follow the tire manufacturers recomendation
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That signal is from your tire monitoring sensors, telling you that there is air pressure difference between tires. The tire pressure should be same in all tires.
every different vehicle and different tire has a (correct) tire pressure for that particular application.check your drivers door sticker or plate for tire size and pressure and then check your actual tires sidewall for the tires specified pressure. the vehicle sticker (Usually) takes presidence.
Hi, the tire pressure monitor detects any changes in the tire inflation pressure.
Therefore, it must initialize and store it in its memory if the tires
or wheels have been replaced, re-inflated or the tires have been
rotated. You can re-initialize the system by following these steps:
1. Check and make sure that your tires are inflated to the correct pressure
2. Turn the ignition switch
to the ON position. If the low tire pressure warning light comes on,
push and hold the tire pressure warning reset switch (in the glove box)
until the warning light turns off and then release the switch.
3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
4. Initialization is *not* completed until driving at the vehicle speed
of 19 mph or over for more than one hour. the tire pressure monitoring
starts when initialization is completed.
It should reset by itself after you resolve the low pressure problem and drive it a bit. The sensor will usually reset within 24 hours if the vehicle is driven a couple of times. If it does not reset, the sensor could be damaged or defective. BillB
the correct tire pressure is not necessarily vehicle specific. If you look on the sidewall of the tire there will be the pressure specification for that specific tire.
×