Tip & How-To about Buick LeSabre

Buick service light 1991-01

LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

0helpful
2answers

how to reset oil change light

Hello javjr.
Here is what it says in the owners manual.
  1. Turn the ignition to "ON".
  2. Press the GAGE INFO button on the Driver Information Center (DIC) switch to view OIL LIFE INDEX.
  3. Press and hold the D.I.C. RESET button until the display reads ENGINE OIL INDEX 100% NORMAL. The engine oil life monitor is now reset.
  4. Turn the ignition "OFF".
There you are, thank you for using FixYA.

KL
0helpful
3answers

how do you reset oil change indicator in a pontiac 2007 g5 coupe

Turn the key to the "on" position with the engine "off". Then step on the gas pedal to the floor 3 times.
0helpful
2answers

change engine oil soon light on, how do I turn it off?

Turn the ignition to ON. Press the GAGE INFO button on the driver information center (DIG) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIG until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset.. Turn the ignition OFF.

Best of luck.
Greg
0helpful
1answer

i have a 1993 park ave and need to now how to reset the transmiss

if you got climate control air conditioner control buttons turn on ignition key enter the self diagnostic system. select pcm override ps13 tps sensor learn.press the warmer button. the driver information center should display 09.indicating that the garage shift value has been reset.select pcm override ps14 tran adapt.press the cooler button the dic should display90 indicating the up shift adapt value been reset.press warmer button the dic should display 09 indicating the steady state adapt value has been reset. press and hold the off and rear defog buttons on dic until the message .transaxle oil life reset is displayed on the dic.
Not finding what you are looking for?

2,444 views

Ask a Question

Usually answered in minutes!

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Loading...