1993 Toyota Camry V6 Logo
Posted on Dec 07, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Right headlight don't work

After replaceing bulb right headlight (low beam) still don't work (high beam works fine). The fuse is fine.

1 Answer

Dan Connors

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 119 Answers
  • Posted on Dec 07, 2009
Dan Connors
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Governor:

An expert whose answer got voted for 20 times.

Joined: Dec 03, 2009
Answers
119
Questions
1
Helped
29549
Points
336

Maybe contact wire dirty or broken at light,or bad ground?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

How do I fix problem with my right side low beam headlight on 2007 jeep Liberty

Check the wiring on that light. Also check the bulb with a couple of wires to the battery, or swap the bulb left to right to make sure the new bulb is okay.
0helpful
3answers
0helpful
1answer

High beams work for both lights, 1 low beam does not

Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?
0helpful
1answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.

check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car
1helpful
3answers
3helpful
2answers

2003 GMC Envoy low beam head lights will not come on. The bulbs are not blown, fuse's ok, no power coming to the head light connector. minimal power to the fuse compartment with fuse removed. 9 to 10...

The problem is a Headlight module. Fuse box under the hood has two black modules side by side, the one on your right is the headlight module the one on the left is the fan module. Try swapping them, if the headlights work replace bad module, don't drive vehicle with the bad module in the fan slot. Mine kept going bad because I had a high intensity bulb on one side.
0helpful
1answer

The low-beam headlights don't work. The fuses are fine as I replaced them with those of the high-beams and the high-beams worked. Other than both bulbs burning out at the same time what else could be...

Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.
0helpful
1answer

I have replaced both headlight bulbs(bulb number 9007), high beams work just fine, the low beam on the right side still does not work?

Hello butterisi: My name is Roger and I Will help you. I would look in the fuse box under the hood Specifically fuse 13. This is the fuse for the right low beam headlight. If ok I would suspect the multi function switch. Which is also the turn signal switch. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger
2helpful
1answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?

Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block
0helpful
1answer

Low Beam headlights out on Vovlo XC90

faulty light switch or light control module
Not finding what you are looking for?

177 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...