Why did my VDC, slip, ABS and brake lights come on all at the same time while driving? 2005 maxima se

Quit guessing and have ABS codes read. Symptoms would be indicative of a bad wheel sensor which often fail with hub/CV failures.

NO, its NOT SAFE TO DRIVE. Your car may loose power in the middle of the intersection and then what? VDC and Slip light may be related to ABS system, please have it check.

I think a trip to the nissan dealer may be needed. The Slip and VDC sytem is tied into the anti-lock brake system. Could be as simple as a vacuum leak or a bad check valve at the brake booster, or the ABS system could be malfunctioning.

OBD2Guide com Technical service for OBD2 auto scan tools

Sounds like a failed/damaged wheel speed sensor problem to me.

I have a 2005 Nissan Pathfinder, the VDC light and the "Slip" light came on the dash, and the slip light was coming on while i was driving at the speed of 20 mph

Had the same problem ****** slips, had to rebuild transmission.

If the ABS light is on, it's a good idea to find out what codes are stored.

The OBD-II system allows many codes to be read but a specialist with an ABS BrakeScan tool will be needed in order to find the codes for the ABS system for your vehicle.

I bought a Brakescan tool that works on most Ford, Chrysler, and GM vehicles from 1996 through 2005 but, I don't think it will work with the Nissan Maxima.

So, that's why I would direct you to the dealer for this one.

VDC/ OFF light is still ON only ? or also SLIP + VDC/OFF ?

if VDC/OFF only u must check ur brake fluid status if both VDC and SLIP u still have problems with ur ABS module and steering wheel

was toll before disconnect the battery for five seconds and it will clear all the lights codes

sounds like a dodgy ABS sensor (change both) but while your there also check the condition of your brake pads