-
Chevrolet Master
2,993 Answers
- Posted on Nov 19, 2009
Re: Is there a torque spec on the spindle nut for the...
- nstall the caliper mounting bolts. Perform the following procedure before installing the caliper guide pin bolts (15 Series only).
-
Remove all traces of the original adhesive patch.
-
Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
-
Apply Red Loctite#272 to the threads of the bolt.
-
Install the caliper mounting bolts (25 series). Tighten the caliper guide pin bolts to 42 Nm (31 ft. lbs.) on the 15 series; 108 Nm (80 ft. lbs.) on the 25 series.
Testimonial: "thank you that was very helpful"
HOw about a torque spec on the spindle nut for the rear rotor?
×