There are hidden cheats (just like a video game)
this is cool try it out.
1. ignition off
2.Press and hold trip meter button(left black button) down and turn igniton kry to first position. Keep the button pressed about 5 seconds until the words Oil Service or Inspection reset appears on LCD display.
3. Release the button then press and hold till reset begins to flash
while the display is flashing let go then press again.
the display will read END SIA and your all done.
In practice you have to make the inputs quickly, do not delay as you will have to start over
There is no reset for the SES. The light is on because the system has recognized a problem with the emissions system. You can use an OBDII scanner to turn the light off but if you don't fix the problem tripping the light it's going to come back on. Have you obtained the codes yet to see what's wrong?
Testimonial: "Great advice. Knows what he's talking about."
SOURCE: The service engine soon light.
QUITE SIMPLE THE SERVICE INDICATOR NEEDS TO BE RESET AGAIN YOU MIGHT HAVE TO TAKE IT TO RANGE ROVER DEALER THOUGH.
SOURCE: HOW DO YOU RESET SERVICE LIGHT ON A 2006 RANGE
reset service light. The SIA information is stored in the instrument cluster EEPROM and can only be reset by using T4. (Dealer tool)
SOURCE: the service engine soon light
Try this: Switch ignition OFF Press and Hold left instrument panel reset button, switch ignition ON to position 1 Keep reset button pressed for approximately 5 seconds until the LCD displays "RESET SIA". The distance to service and the service type " Inspection" will be displayed. To reset distance the left hand button should be pressed before the 'RESET' message has flashed 5 times. The LCD will display 'END SIA'. Switch ignition off The timing to do this is must be about 5 seconds, if this is not working you can try again. I have a Range Rover 2005 and it worked for me.
Try this:
Switch ignition OFF
Press and Hold left instrument panel reset button, switch ignition ON to position 1
Keep reset button pressed for approximately 5 seconds until the LCD displays "RESET SIA".
The distance to service and the service type " Inspection" will be displayed.
To reset distance the left hand button should be pressed before the 'RESET' message has
flashed 5 times. The LCD will display 'END SIA'. Switch ignition off
The timing to do this is must be about 5 seconds, if this is not working you can try again.
I have a Range Rover 2005 and it worked for me.
2,366 views
Usually answered in minutes!
no, I'm not sure where to get those codes.
×