* This does not work in older models, like my Audi A4 /1.6, 1995. It needs the cable and the program ( e.g. VAG-COM). Even with this, clearing the code (IN1 or IN2) is quite complicated.
Forget about above solution !!!
Reset oil change light on yours 2004 Audi 1.8T works only with a diagnosis scantool, like VAG-COM, Bosch KTS, TEXA, ...
SOURCE: 1999 audi a4 oil reset light
Turn off the ignition press and hold the button on the leftside of the display while turning the ignition on it should say service oil on the display pull out the button on the rightside of the display until the service oil clears
SOURCE: 2004 Audi A4 1.8 T
On my '99, this is the procedure:
Put the key in the ignition. Press and hold the left reset "stick" on the cluster, then turn the key to full electrical power. Pull out on the right "stick" and the display will turn to all dashes like this: ---- Turn the key off, then release the left stick, and restart the car and it should be reset.
SOURCE: resetting oil change dash light
Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 times. Oil change light should blink and you should here a beep, light will go out. Turn ignition key off.
SOURCE: how to reset oil change light on a audi 2008 a6
Hi my name is mike ! on your vehicle the change oil light has to be reset by a scanner with european software ,it will have to be done at a shop ,most every audi that we work on at the shop I work at has to be done this way ,hope this has helped you !
1,295 views
Usually answered in minutes!
×