For ''what does obd2 code p0117 on my 2000 crown victoria means''

Code 16 means the PCM is offline or there is a communication issue between the PCM and PATS controller. Depending on model and year, the PATS controller could be in the instrument cluster, BCM or stand alone PATS module.
Nov 1, 2018

Ford is locked out and will not turn over code 16 flashing

..

P0705 Transmission Range Sensor TRS Circuit Malfunction

Check the wiring on the TCC Transmission Converter Clutch solenoid at the trans and the PCM . It is possible the PCM is bad . BBB Industries online has free wiring diagrams for this model.

Put -- 1999 Ford Crown Vic OBD2 Code PO1451 ---
into google

You can find almost any code & lots to read
on google & also You Tube Video

No,not without a lot of switching of electronics

1993 is OBD1 & 1996 on is OBD2 System

The engine may be okey-- but not the induction
system or any electrical

possibly the fact it was an obd1 engine and the 96 is obd2

that is so easy, you just plus a obd2 code reader with the function of erase fault code to clean codes.
_____________
airbag reset tools

Hello
When the service engine soon light (Also called the check engine light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

Code 18 is a spout circuit problem. You probably need the flow chart to check all of the components in that circuit which include the ecm, the temp sensor, and the engine control module among other things.

take it to local auto store and have them read the code to you it will tell you what the problem is