I have a 96 turbo diesel 2.5ltr landrover discover. I am replacing the alternator with a Denso AMR 3412. i need clear guidance on where the three wires are bolted onto the alternator as it is different to the marelli original.
SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.
Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees
SOURCE: i connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.
if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).
SOURCE: landrover discovery, automatic... i cannot
could be eithor
AAMCO gives free estaments and they are the experts in this feild
SOURCE: remove the inside rear door panel for 1995 Landrover
Remove the 2 bolts holding the grab handle ( 10mm) Remove the screw holding the pull handle plastic cover and remove the cover. Use a fork and pry the panel away from the door and you will be able to pull it off. Before refitting, check all of the plastic clips that hold the panel to the door, some will have broken off. Remove them and fit them back on to the trim panel and glue them on. Refit is reverse as removal. Hope that helps
SOURCE: need radio code for 1999 landrover discovery 1
Hi,
Can you confirm what brand the stereo is? If it is the Visteon brand that Landrover fit then I can help. Just let me know.
Thanks.
613 views
Usually answered in minutes!
×