Where is the camshaft position sensor on a 2005 Kia Sedona

2006-2014 sedona .. this engine has one

for better result download the pdf file
KIA CARNIVAL SEDONA SERVICE REPAIR MANUAL 2006 2007 2008 2009 DOWNLOAD

crank se

I hope this diagram is helpful.

front of motor take off timing cover you;ll see the wires ging to it 2 10 mmm bolts

By the camshaft reluctor wheel on the front of the engine by the belt side. Should be one bolt and a wire plug.

Crankshaft position sensor is mounted on the engine block close to the transmission housing, in front of the crankshaft ..

It is located right next to the intake cam on the head.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

code P0320 stored.
Tests/Procedures:
1. Check if the oil pump drive housing has rotated on the hold down clamp. If it has, replace the oil pump drive gear and housing.

2. Scope the Crankshaft Position (CKP) sensor.

3. Scope the Camshaft Position (CMP) sensor.

Potential Causes: Camshaft Position Sensor (CMP)
Crankshaft Position Sensor (CKP)
Distributor Sync

Only a qulified mechanic will be able to tell you the cost once he eliminates each possibility.