- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
unplug the heater motor and put a hot wire to it to check the motor if it blows if the wire gets real hot you need to change the heater blower motor. You will probably need to change the heater fan motor resistor. follow the heater fan wire and it will go to the resistor
is the switch on dash in one piece as on these cars the bottom of the switch breaks ,you push switch to turn on a/c and turn it for the fan left is re circulate right is fan with fresh air in as well
You need a blower motor resistor,and the heater blower motor should be checked for high amp draw. check Napa for the part or go to Dodge..prpbably about 60.00 dollars.
With the engine off, radio too, turn the key on and try the heater fan on all speeds. No fan, check the fuses. Fan is ok, check the coolant level, if thats fine, then check for a mouse nest in the duct work. Frankster016
×