Replace ignition switch 1987 dodge ram 250 van with tilt steering

SOURCE: 1991 dodge ram 250 van 318 engine won't start

ALWAYS CHECK THE GROUND ON A DODGE

SOURCE: how do I remove and replace the steering column of 1992 ram 250 v

remove coupling from top of steering rack ( make sure you mark postition of coupling first with centre punch so the replacement will be in the same position)
remove covers from steering column and ignition + anything else attached to column. good luck

Mike Butler

• 6674 Answers
• Posted on Aug 02, 2009

SOURCE: ive changed the ignition switch and checked the

Do you have ballast resistor on firewall by chance? ( 2"x 4" ceramic like block,usually held with 1 bolt in center)

SOURCE: I need to remove an ignition switch from a 1987 Dodge van

1. Check the Motors, or similar manual at your public library for your van or enter your problem in your internet search engine.

SOURCE: 1987 dodge ram van STEERING COLUMN

to whom this may concern did you find a steering column. Are you replacing it in a 1987 dodge pick-up