Hi from uk the marks i assume are the timing belt marks ?? to st up turn engine to T D C number 1 cyl fire check the cam cog and view the hole in the cg is at top and the vertical line mark on cam bearing cap are lined up along with the crank mark which should line up with the point on engine this mark is approx at 11 o clock position when viewed if not rotate engineanother rev till both marks line up release tensioner (renew it !) fit new belt from crank anticlockwise to cam then round tensioner push tensioner against belt firmly and torque 43-55 Nm turn engine by hand till marks re aligne ok ?check tension ? ok ? torque crank pully bolt 170-180 Nm reassemble engine hope this helps ?
309 views
Usually answered in minutes!
×