1995 ford crown victoria gear locked , aleays stuck when parked at P position, need to torn off the engine to move the gear

Use vinegar to unfreeze

check for a broken selector cable of the fitting on the box is loose.

Are the brake lights working, as a safety feature the foot brake has to be held on at the same time a gear is selected. The lock is an electrical operated solenoid operated on the same circuit as the brake lights, if a fault has developed in that circuit and the brake lights don't work, it won't come out of park, could be the fuse or the brake light switch. Good luck.

No up
No down
One window
All windows
Window fails down
You hear motor run & no window movement
You work the switches & they work sometimes

I would imagine you need that answered at a
repair shop

it sounds like the ignition cylinder has dropped a tumbler not sure of replacement procedure for ur car but it needs the ignition cylinder replaced

Had a similar problem. Solved it two ways first place key in the 3 position move gear to N then start and it will shift easily. Second solution check brake light fuse, it is probably blown replace it and gears will shift OK.

check for brake lights if light don't work check the 2 wires going to brake light switch behind brake pedal the wires do break

replace the wiper motor, the park position is broken, need to replace complete wiper motor.

most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

Are you stepping on the brake before you attempt to shift.