Diagram of serpentine belt ML320

It's a bit obvious but you should get in touch with Mercedes. You may even find a helpful technician at a Mercedes dealership, you never know!

Here's a link to your belt,put wrench on bolt a tensioner,turn to take tension off,then remove belt,need 2 people to do this. 2000 Volkswagen Passat Serpentine Belt Routing and Timing Belt Diagrams

Go to google search and type in 2000 Windstar serpentine belt diagram.

For serpentine belt replacing and diagram details,click the link below:----http://schematicsdiagram.blogspot.com/2011/12/2000-toyota-sienna-serpentine-belt.html
---------This will help.Thanks.helpmech.

The link below will take you to a diagram of the serpentine belt placement.

http://www.2carpros.com/diagrams/hyundai/sonata/2000

2000 Volkswagen Golf 4-Cyl. 2.0 L

Serpentine - Alt. & W.P.; W/O A.C.; W/O Dual Sided V-Ribbed Belt




Serpentine - Alt. & A.C.; W/O Dual Sided V-Ribbed Belt




Serpentine; W/A.C.; W/Dual Sided V-Ribbed Belt



I hope help you with this (remember rated this help) Good luck.

HI. i have posted the diagram requested below.

You should be able to see the diagram for the serpentine belt when you open the hood.

here you go

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine