A 1999 chrysler cirrus lxi that has the check engine light on, won't shift out of 2nd gear, and the speedometer isn't working. Last night I shook some wires around and it started functioning again properly but this morning..same problem. Must have a wire that is shorting? Which wires would I check?
Had the same problem on my 1999 cirrus lxi. Replaced the output speed sensor on the tranny and topped off the tranny fluid... cleared the check engine light and the cirrus ran great. Caution...the output speed sensor reqires removal of the front left tie and plastic weatherproofing to replace. once you find it's locvation, the replacement is relatively easy.
Check the wiring on the box,driverside,its a alum box with a black front,that has a harness screws into it. wires could be worn or it is coming unplugged !!
replaced this on mine fixed this on my 97 lxi.
×
I had same problems and changed the trans control module mentioned above. right side of engine compartment, silver box with grooves on it. found one online back east auto parts. not too pricey. fix it. after checking wires this may be it. engine codes imply this. don't change the bottom module, just the top engine area one. not the one on transaxle.
Try this...
Replace the fuel cap and try disconnecting the battery for 10 minutes and connecting it back again.
I have a 95 cirrus lxi and I have been having problems with the trans not shifting right and the speedometer seems to go haywire. Do you think that I have the same problem?
1,346 views
Usually answered in minutes!
×