What type engine oil do I need? - 1997 Lexus ES 300

2009 Honda Civic
L4-1.3L Hybrid

Fluid Types

• Vehicle
• Engine, Cooling and Exhaust
• Engine
• Engine Lubrication
• Engine Oil
• Specifications
• Fluid Types

FLUID TYPES
Engine Oil

Type .................... API Premium Grade 0W-20 Detergent Oil

A 5W-20 oil may be used if 0W-20 is not available.

You may use a synthetic oil if it meets the same requirements given for a conventional motor oil: it displays the API certification seal, and is the proper wei

On what? Need make model year and engine type

you use 10w40 or 20w50 motor oil in this if you talking about engine if your talking about differential oil then its 80 weight oil.

http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain.jsp?categoryName=SPECIFICATIONS&childCategoryNameForTitle=Engine+Oil+Type/Weight/Capacity&appQuestionName=Use+in+temperatures+above+10+degrees&childCatId=23200283&categoryNameForTitle=Specifications&appQtext=Use+in+temperatures+above+10+degrees&categoryNValue=23299999&appQId=4294805813&childCatName=ENGINE+OIL+TYPE/WEIGHT/CAPACITY&appIdsArray= Click on link.

BEST TO LET DEALERSHIP CHANGE ENGINE OIL.YOU NEED A DEALERSHIP OIL FILTER.YOUR OIL FILTER INSIDE A HOUSING ON FRONT SIDE OF THE ENGINE. CHANGING YOUR OWN OIL NOT HARD.YOU NEED 9 QUARTS OF OIL LOOK INSIDE GLOVECOMPARTMENT FOR OWNERS MANUAL TO SEE WHAT TYPE OF ENGINE OIL YOU NEED TO USE AND HOW MANY QUARTS.IF YOU DONT CHECK READ MANUAL TO SEE WHAT OIL TYPE AND QUARTS YOU NEED. IF YOU BLOW OR DAMAGE THE ENGINE WARRANTY WILL NOT COVER THE ENGINE.FIRST OF ALL TO CHANGE ENGINE OIL YOU CRANK VECHICLE UP LET IDLE FEW MINUTES TO THIN OUT OIL THEN YOU TURN OFF ENGINE. YOU NEED TO RAISE VECHICLE USING THE FACTORY JACK.USE JACK STANDS. LOOK IN OWNERS FOR CAR JACK LIFTING LOCATIONS TO KEEP FROM DAMAGING ROCKER PANELS. AND PLACE A DRAIN PAN UNDER THE OIL PAN. UNDER THE VECHICLE.YOU NEED A WRENCH TO REMOVE OIL PAN DRAIN PLUG.WHEN ALL THE OLD OIL DRAIN OUT IN THE DRAIN PAN.SCREW BACK IN THE DRAIN PLUG TIGHTEN IT DONT OVER TIGHTEN STRIP THREADS.THEN YOU NEED SOCKET TYPE OIL WRENCH YOU USE WITH A 3/8 RATCHET WRENCH REMOVE OIL FILTER HOUSING.PLACE RAGS AROUND THE OIL FILTER HOUSING TO CATCH OIL SPILL. YOU WILL NEED TO GO TO THE DEALERSHIP FOR THE OIL FILTER AND FILTER HOUSING O RINGS. ONCE YOU GET NEW OIL FILTER AND O - RINGS INSTALL THEM IN THE OIL FILTER HOUSING.LOCATED OIL FILLER CAP ON VALVE COVER UNDER THE HOOD.REMOVE OIL FILLER CAP.POUR OIL IN ENGINE USING A FUNNEL.ENGINE HOLDS ABOUT 8.5 TO 9.0 QUARTS OIL. BUT LOOK IN THE OWNERS MANUAL CHECK HOW MANY QUARTS ENGINE NEED.CHECK OIL DIP STICK OIL LEVEL SHOULD BE ON THE FULL MARK ON THE ENGINE OIL DIP STICK.TO BE ON THE SAFE SIDE BUY 10 QUARTS OF OIL FOR A EXTRA.DONT OVER FILL MAKE SURE YOUR OIL LEVEL CORRECT.OIL DRAIN PLUG AND OIL FILTER TIGHT BEFORE CRANKING THE ENGINE.LOOK IN THE OWNERS MANUAL FOR OIL DIP STICK AND LOCATION.

2003 FORD FOCUS 2.0L 4-cyl Engine Code [3]
Engine Oil Grade 1......API* All TEMPS......SAE 5W-20, Engine, with new oil filter 4.3 liters.
Thank you for using fixya and good luck Oil Drain Plug.....17ft/lbs Torque

You did not specify the engine size but I looked them both up.They take 5w-30 and both take 4 qts.Hope this helps.

2008 Saturn Truck Outlook AWD V6-3.6L

Vehicle: Fluid Type Specifications
Engine Oil
ENGINE OIL TYPE
Look for two things:
1. GM6094M Your vehicle's engine requires oil meeting GM Standard GM6094M.
2. SAE 5W-30 as shown in the viscosity chart, SAE 5W-30 is best for your vehicle. These numbers on an oil container show its viscosity, or
thickness. Do not use other viscosity oils such as SAE 20W-50. Oils meeting these requirements should also have the starburst symbol on the
container. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). You should look for this information
on the oil container, and use only those oils that are identified as meeting GM Standard GM6094M and have the starburst symbol on the front of
the oil container.
NOTICE: Use only engine oil identified as meeting GM Standard GM6094M and showing the American Petroleum Institute Certified For
Gasoline Engines starburst symbol. Failure to use the recommended oil can result in engine damage not covered by your warranty.
GM Goodwrench oil meets all the requirements for your vehicle.
If you are in an area of extreme cold, where the temperature falls below -20°F (-29°C), it is recommended that you use either an SAE 5W-30
synthetic oil or an SAE 0W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
ENGINE OIL ADDITIVES
Do not add anything to your oil. The recommended oils with the starburst symbol that meet GM Standard GM6094M are all you will need for good
performance and engine protection.

if you stay in cold weather, use 5w-30 for engine oil, if warm weather 10w-40 oil THOSE FOR ENGINE..

FOR automatic gearbox use type MERCON V atf or D III

I need the engine side