At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to take out the radio out of a 2001 accent GS
Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 2:44
https://www.youtube.com/watch?v=fzqMNho3xIU
Nov 25, 2012 - Uploaded by mig dups
2000 Hyundai Accent GS turns over - no start. ... HyundaiCrankshaft Position Sensor Replace Timing Belt ...
If it doesnt have a acsess panel to remove in the trunk you will have to pull carpet cover back to get acsess to plastic wingnuts or bolts holding it in. Hope this helps
you might need to look at the wires on the back of the radio, there might be an inline fuse, also you best have a look at the main fuse panel in the car and see if the one for the radio and clock has blown
Go to autozone.com and register.. Then enter you car info and you will have a worth of info about you car.. Such as all the parts,, how to,, diagrams etc..
P1709 referrs to
KICK DOWN SERVO SWITCH >- Open, short circuit
DESCRIPTION
• Detects the point of time when K/D band starts operation to control fluid pressure when K/D band operates.Detection condition• 1st or 3rd gear signal is present for more than 5 sec.• Transfer shaft speed is greater than 900 rpm• Fluid temperature is above 60°C• PCM receives an "OFF" signal from K/D servo s/wCheck item• • • • • Harness & connnector• K/D servo s/w• K/D servo assembly
×