MAKE SURE YOU HAVE THE WIRES ON THE RIGHT PLUGS.YOU MAY NEED TO GET THE CODES SCANNED TO NARROW DOWN YOUR PROBLEM BUT I THINK IT'S A FIREING ORDER PROBLEM.IF THIS IS NOT THE CASE THEN DO A COMPRESSION TEST ON THE MOTOR TO SEE IF YOU NEED TO GO DEAPER.
I think that the problem is a firing order. So firstly ensure that the wires are placed in the right position, that is, they are on the right plugs, then get the codes to be scanned so as to reduce the problem. but if the problem is not solved yet then check the fuel injectors if the truck has fuel injectors, you may have fuel injectors not getting signal or the injectors themselves could be damaged and you need to replace them. Thanks
If the truck has fuel injectors and not a tbi system you may have fuel injectors not getting signal or the injectors themselves could be bad
312 views
Usually answered in minutes!
×