At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your 2007 Impala is stuck in park and the gear override silver button doesn't work, there may be a few potential problems that are causing the problem. Here are some common causes and troubleshooting solutions you can try: Brake light switch: The most common cause of this problem is a faulty brake light switch. The brake light switch is responsible for sending a signal to the shift interlock solenoid to release the shifter when the brake pedal is depressed and can prevent the shifter from releasing if the switch does not operate properly. Make sure your brake lights work by pressing on the brake pedal. If they don't work, it's probably a brake light switch issue that needs to be replaced. Shift Interlock Solenoid: The shift interlock solenoid is a mechanism that prevents the shifter from moving without pressing the brake pedal If the solenoid is faulty or a blown fuse can cause the shifter to go into park. Check the fuse connected to the shift interlock system and replace if necessary. If the fuse is good, the solenoid may need to be replaced. Shift Cable: The shift cable connects the shifter to the transmission and allows you to change gears. Damaged, loose, or misaligned cables can prevent the shifter from leaving the parking space. Inspect the shift cable for any obvious issues and make sure it is securely attached to the shifter and transmission. Shift lock control module: Some vehicles have a shift lock control module that ensures proper operation of the shift interlock system. Malfunction of this module can cause the problem. It may be necessary to use a diagnostic scan tool to check for any error codes associated with the module. Ignition switch: Faulty ignition under certain conditions
Modern vehicles have what's called a shift interlock system. This safety mechanism prevents the gear shift lever from moving out of the Park position and into a moving gear position unless the brake pedal is pressed. The components that make this happen are the brake switch near the brake pedal and the shift interlock solenoid in the shifter assembly. The brake switch is also used to illuminate the vehicle's rear brake lights upon vehicle braking, so it gets used a lot. This frequent usage makes it a prime suspect over the interlock solenoid for being the culprit. I'd recommend having someone check to see if you have brake lights the next time the issue presents, or if you'd rather guess at a repair, consider brake light switch replacement. You can read about how to replace a brake light switch here: https://www.yourmechanic.com/article/how-to-replace-your-brake-light-switch-by-spencer-cates
Had a similar problem. Solved it two ways first place key in the 3 position move gear to N then start and it will shift easily. Second solution check brake light fuse, it is probably blown replace it and gears will shift OK.
Before you go too far, your problem might be as simple as mine was. The gear shift knob had slipped and was not down far enough on the shaft to engage the release mechanism.
if the shifter is moving then it is probably your trans. but if the shifter is not moving from the park possition (if it is an automatic) check to see if brake lights are coming on if not check fuse for brake lights,it also controls your shift lock.try turning key to possition before lights come on dash board and moving shifter into nuetral pos. then start car and put into gear give that a try, if it does the shift lock isn`t working.
check the fuses as if the brake light fuse is blown it won`t allow the shifter to move out of park.it has a shift interlock system so the gear shift won`t accidentally be moved out of park by mistake.
If the engine starts, but wont shift out of park, you should check that your brake lights are working. The interlock solenoid is powered by the brake light switch, if the fuse is blown or if the brake light switch is bad, the car wont shift out of park...I hope this helps.
do the brake lights work? the system has a lock out that keeps you from moving out of park unless the brake circuit is activated, hence no brake lights no park lock out release, if the brk lights do work u most have a stuck or defective park lock out solenoid.
is it parked in a steep hill, if so,try to releave some pressure off it,and try to shift it,if not,block wheels so van wont move,inspect shift linkage,if ok,undo linkage from tranny,try shifter invan if it moves ok,if not,inspectshifter and linkange,if its ok,try moving shifter arm at tranny,be careful!if it doesnt move, youll have to take oil pan off tranny and inspect park gear lock.
×