-
Nissan Master
2,993 Answers
- Posted on Oct 11, 2009
Re: How do i get to the water pump on a 2004 dodge...
-
Drain the cooling system.
-
Remove or disconnect the following:
-
Negative battery cable
-
Timing chain cover
-
Timing chain and guides
-
Water pump and discard the gasket
To install:
-
Clean all mating surfaces of any residual gasket material.
-
Install or connect the following:
-
Water pump with a new gasket and torque the bolts to 105 inch lbs. (12 Nm)
-
Timing chain guides and chain
-
Timing chain cover
-
Negative battery cable
-
Fill the cooling system to the proper level.
-
Start the vehicle, check for leaks and repair if necessary.
Water pump—2.7L engine
×