1992 Nissan Maxima Logo
Posted on Oct 08, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The car alarm goes off and won't allow the car to crank. I had a window replaced in the drivers door and the automatic locks don't work what can I do. do i need a code to reset the alarm

  • ospblak Oct 08, 2009

    NO they were not working. the automatice locks don't work now. can I use the code on the outside of the door to open the car with out the alarm going off

    Thanks,

  • Anonymous May 11, 2010

    Were al the door locks working before the window was replaced? Do your windows work now? Have you had any other work done to the car recently?

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 78 Answers
  • Posted on May 02, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Feb 25, 2010
Answers
78
Questions
0
Helped
27508
Points
114

Whomever replaced the window removed the alarm harness. have the panel removed and check that the alarm harness is still attached to the back of the lock cylinder, Also you may try to unlock the car from the passenger side to disarm the alarm.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
1helpful
1answer

Door locks auto. as soon as you start the car?

Take car to dealer lock system needs to be reset. Some vehicles lock when get to a certain speed your vehicle simple needs a reset.
0helpful
1answer

Alarm won't turn off

the valet key doesnt have a transponder chip in it, so it will allow physical turning of keyways and operations, but will not disable the alarm and often wont disable the immobilizer.

sorry to say i think you will need to get an autolocksmith , or main dealer to get you a functioning key with transponder chip mapped to your cars rfid system that will allow alarm to be enabled /disabled
0helpful
2answers

Car won't start and alarm is going off

This is an anti-theft measure. Usually, there is a code to input in the radio/display to disable it. If you can't find it in your owner's manual, you'll need to contact a dealer to get the code.

There are some folks who sell the codes online. Beware of scams with that.
1helpful
2answers

Suddenly, my automatic door unlock button on remote for my 2005 Chevrolet Equinox will not unlock doors and alarms goes off if I manually open driver's door and don't start car right away. Wh

I tried replacing battery in my remote. Sometimes it work and sometimes it doesn't. I think it could be a wiring problem in the remote. I know it's a major paun having to hurry up and put key in ignition befofr alarm starts going off.
0helpful
1answer

Anti theft device will not allow me to crank my toyota tundra

try rolling down the window while in the car and put your hand out the door and unlock and lock the car while in it then start it.
0helpful
1answer

Doors wont lock. Windows won't work. Car thinks the door is locked because when I open the hood alarm goes off. Security light is flashing when doors are closed. Locks don't engage when driving...

Window fuse's and relay's may be up under driver or passenger side dash or behind glove box, under the hood and even under the seats, and finally on the ends of the dash. All passenger power windows and locks are controlled thru and get power from the master control switch on the drivers door. Could be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return to neutral when released. It could also be the body control module.
0helpful
1answer

After alarm goes off, all electrical works except car won't start

hi there
from what it sounds to me is that the alarm is still in anit theft mode
i had this happen to my vehicle

one thing you can try is lock all the doors try and unlock from the passenger side make sure that all the lock come up to the top where they should be
then try it

if that does not work then lift up the rear of the car like it was being towed and it should reset the alarm
short of that you will have to have alarm shop come to you
don
0helpful
2answers

2004 Saab 9-3 Cascading electrical problems

Did you sovle your problem? then how?
Not finding what you are looking for?

280 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...