The Vehicle Speed sensor is located on top of the differential housing. it is held in with one bolt and takes about 15 minutes to change. Part #56028 187AC. Always have the dealership check and verify for the latest updated part number. REMOVAL: Raise vehicle on hoist. Remove brake line mounting nut and remove the brake line from the sensor stud. Remove mounting stud from the sensor and shield Rear Speed Sensor Mounting . Remove sensor and shield from differential housing. INSTALLATION: Connect harness to sensor. Be sure seal is securely in place between sensor and wiring connector. Install O-ring on sensor (if removed) Insert sensor in differential housing. Install sensor shield. Install the sensor mounting stud and tighten to 24 N·m (18 ft. lbs.).
Install the brake line on the sensor stud and install the nut.
Lower vehicle. ,I hope this helps you?
268 views
Usually answered in minutes!
×