On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal (if it has one) and then you can access the outer door handle. It sounds like the linkage connecting the handle to the latch may have broken/separated
Why is my oil pump pressure gauge reading low then when i hit the gas it goes up until i let of the gas
My keys cannot open the lock of doors < i never locked it, but recently mu cousin locked so is there any way to open the doors
SOURCE: doors cannot be opened from outside
are these doors electric or stander. u could pull off the door cover and check the mechanical arm inside the door to see if it fell of the lock for the key
SOURCE: my drivers door wont open the outside....
Broken handle. You can get another from years 89-94. Just be sure to change out the lock cylinder with the one that is broken.
616 views
Usually answered in minutes!
×