Replace serpentine belt on 2000 ford focus

in the link for Serpentine Belt

https://www.google.com/search?q=how+to+replace+serpentine+belt+2008+ford+focus

This link for timing Belt

https://www.google.com/search?q=how+to+replace+camshaft+belt+2008+ford+focus

..

https://www.google.com/#q=Need+a+Serpentine+belt+diagram+for+a+2000+ford+focus+16+valve+4+cylinder+motor

Hope this helps

if it was my car id replace both belt and tentioner because belt tentioners are proun to fail on these cars

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f802e8109 click on link to belt diagram.

Belt diagrams can be found at most NAPA auto parts stores. The tensioner is located on the front of the engine, usually above the other pulleys that the belt goes around.

Tensioner pulley is most likely worn out; however, with it running loose like that, I would suggest replacing the belt with the tensioner.

How To Install Replace Engine Serpentine Belt Ford Focus Zetec DOHC 1AAuto.com

First, you need a copy of the belt routing diagram. Follow this link and print it out for refrence. You will need it. http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Next, here's a link to a video series on how to replace your serpentine belt that will be very helpful!
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Good luck!

Hi

Thanks for using FixYa. You can look at this picture for serpentine belt for your 2002 Ford Focus Z3--



Ford Focus Z3 Serpentine belt Removal--

· Jack up the front of the vehicle and support it on jack stands. Use a wrench to remove two bolts and take off the drive belt lower cover.
· Note belt routing and make a sketch for your reference if you don't have a belt routing diagram from the manufacturer.
· Find the belt tensioner pulley. Use your wrench to rotate the tensioner pulley by pulling clockwise on a bolt in the center of the pulley. Slip the old belt off of the tensioner pulley.
· Release the belt tensioner. Slip the belt off of the pulleys and install the new belt according to your routing diagram.
· Rotate the tensioner again to allow the new belt to slip over the tensioner pulley. Release the tensioner again. Replace the drive belt lower cover and lower the vehicle.

Please do rate the solution and revert for further assistance.

Thanks
Rylee

If you mean a serpentine belt under $35.00 here is the serpentine belt diagram for a ford Focus