2000 Celica Engine Swap

Swapping the transmission in a vehicle can be a complex and time-consuming task, especially if you are changing from an automatic to a manual transmission. Here are a few things to consider when performing this swap on a 1998 Dodge Ram with a 360 engine:

1. Make sure you have all the necessary parts and tools for the swap, including a manual transmission, a flywheel, a clutch, a pedal assembly, and any other components that may be required.
2. Follow a reliable repair manual or instructional guide for step-by-step instructions on how to complete the swap. It is important to follow the procedures carefully to ensure that the swap is done safely and correctly.
3. Have a professional mechanic check and adjust the transmission linkage, drivetrain, and other components after the swap to ensure that everything is functioning properly.
4. Consider updating the engine control module (ECM) or other related components to ensure that they are compatible with the manual transmission.

Engine Swap question - 2.2 - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn L-Series > L-Series Tech

May 18, 2012 - 4 posts - ‎2 authors
Engine Swap question - 2.2 L-Series Tech. ... which engine i can use to swap into my 2000 LS1 Saturn (stick but i don't think this maters). Saturn L200 Ecotec interchangeable parts
9 posts
Sep 1, 2013
2002 Vue 2.2 Engine Removal out top or lower out ...
20 posts
Aug 22, 2011
Question: Transmission swap
12 posts
May 25, 2007
S-Series Swap Guide
20 posts
Nov 10, 2006
More results from www.saturnfans.com

need tips on locating a 2.2L saturn engine... - Hot Rod Forum ...

If engine sizes are correct match for each vehicle engine swap wont be a problem u can possibly even drop the unibody of cars and swap depending on engine sizes match just unplug everything 8 bolt lift body pull unibody out get new rubber underneith for body support everything is manageble

welcome to modern cars, the newer cars have a TCM.
you can just swap a mech, trans for a electronically swifted trans.
I swapped, you meant.
its not clear what you are doing here,.
why are you swapping engines
and are you expecting both cars to run? which makes above line odd.
no?

bought a automatic transmission filter kit to fix the leak. but it's still leaks is there anything else that i can check to see why it's still leaking

Totally forget about changing an automatic car to standard. That would be a very parts & labor intensive switch and is out of the question. If you have the same year and size engine this will be an easy swap. Just remove the donor engine leaving the bell housing and transmission in place in the donor car. Remove the engine from your car leaving the bell housing and transmission in place. Bolt the donor engine to your old bell housing and you are all set. Mark all connections as to not get confused. A digital camera will be of help in taking photos of how things are hooked up.

Greetings!

Yes, the engine mounts and bell housings are the same.
The swap should be straight forward, however be sure to swap all the vaccum controls and emission system from the 2.6L.

Have fun!
Cheers, Jay

the engine will fit, u will need all the electronics and all drive train parts as well

THE COMPUTER SWAP IS MORE DIFFICULT........

I would not even think about trying! If everything is not 'exactly' the same, don't put yourself through this! Frankster016