Difficult to describe without pictures & illustrations.
1. The door handle is two-piece and the top piece is pryed off/out with a small screwdriver (needs to be removed in order to access two phillips screws behind it.. one at the top and another at the bottom).
2. The door release handle (inside cover) also has a small square cover that needs to be removed to access another phillips head screw behind it... then the cover pops out.
3. Below the arm-rest, there are two more cosmetic plugs covering two more (larger) phillips head screws which must be removed as well
4. The tweeter speaker (forward upper corner of the door is also 'popped' out to allow lifting the panel out of the door frame.
5. Now, there are approx four (4) more screws which need to be removed (covered by cosmetic bottons) three (3) aft and one (1) (possibly 2) forward.
6. Finally, the door panel is held in place by several pop-in round clips. Start prying at the bottom of door panel to start popping them loose & work your way upward to the top of the door panel... once all pop-in clips are popped out, you can now LIFT on the panel to remove it from the door frame. -- careful with the wire harness & connectors inside the door panel & cavity.
648 views
Usually answered in minutes!
×