Are sid and radio code matched for 900s 96 conv?

look in the boot behind a panel left side but models do vary ,then look on the motor/resevoir unit and the resevoir will have a screw cap and you fill through the cap to about a inch from the top

When you start the car the display should ask you for the code....Code In.....you should be able to simply enter the code and the radio should come back on. If 'Code In' does not display when you turn on the radio press and hold the 'band' button and 'code in' should come up on the screen.....let me know if that helps....if not I will go out and re-do mine on my 1997 Saab 900S to double check.....good luck

If the original radio was replaced, code on manual wont match. Most replacement brands have better sound quality than OEM radios. CDs for cars are on their way out (bulk and number of songs at hand) Buy a reputable brand that can accept IPODs or pendrives. All you need to know is if your present radio is DIN or Double DIN , in order to know what size to buy.

my 1995 saab 900s actually has the code written on the casing of the radio once you pull it out

I bought a 98 900s and needed code for radio. Looked through the owners manual , and sure enough , previous owner had writen it down on back page. It's worth a look. Good luck.

I have a 96' Saab Turbo SE Convertible. My code is 3146. Try it to see if it works.

I'm afraid if you don't have the code, you will have to take it to a local dealer or specialist radio store to have it re-coded.

Fortunately, it's not expensive.

1124 is throttle position sensor out of test range
I didn't find anything out for code 1128 but you can go to this website and I'm sure they can help you out there .....

http://www.saabnet.com/

Here is an illustrated tutorial for the 2.0 liter turbo. It is essentially the same for the naturally aspirated 900S: http://bellsouthpwp.net/m/a/mattiaso/WebPages/Auto/therm.htm

my code is 3231 . hope it helps.. oh.. 97 900s