At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My 1995 mitsubishi mirage will start and run about 2 or 3 min, then won't start again for about 10 to 15 min and again run 2 3 minutes then shut off. It's like someone turns the key off. Replaced the fuel filter, fuel pump. What could be wrong ? Last year the mitsubishi shop replaced the grounders and a computer chip for almost the same problem, wouldn't stay running.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds more like the electrical connections are disrupted. Did you replace the entire plug wires? They do fail after a few years in use, and the older carbon wires especially go down.
Anytime you replace a sensor or ignition parts on a Mitsubishi, (also have a 95 Mirage) the whole **** thing goes out of whack and won't start. Have to reset the ECC (ECM) supposedly by allowing it to drain of juice (disconnect both battery cables for about a day) See if this works for you
It could be that the valves need adjusting or redone. When they heat up it swells the rubber and the metal. If you have a bent valve it should do it all the time or it could be one of the valve springs is going. Either way it sounds like it is something in the valve or the valve seats or the springs.
well that sounds like a relay. if your car is an automatic, double check than you replaced the ASD and fuel pump relays and not the trans control relay. if its not the relay, its probably the ECU(PCM).
×