Headrest Removal How do you remove the driver's side headrest in order to put the seatbelt guide on?

Make sure you replace it after removal. It is part of the safety system and prevents you getting a broken neck in a crash.

Depress the large button on the head restraint guide and raise the head restraint to the full up position. Depress the smaller button on the opposite head restraint guide and pull upward to remove from the seat.Jan 16, 2022

Rear headrest removal ' Trailblazer Forum

First off, are you able to move the seat forward, backward, or upward to free up the tension on the seat belt lock so you can again pull out slack? If not, are you able to raise or remove the headrest to create slack in the seatbelt and release the lock? Without a photo of the situation it's difficult to understand how you managed to get a seatbelt stuck around a headrest....

remove drivers side headest Diana, If all else fails pop into a garage and they can show the procedure. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Remove Front Seat Headrests Repair Loose Headrests

Headrest Removal

1992 ford Taurus remove drivers side headrest Google Search

I have a 2012 malibu and looked this same thing up because I just put on a seat cover, on the driver's side head rest, looking at it from the back seat on the driver's side, there's the normal looking latch that let's you adjust the headrest down, but on the right side you'll see a little indentation in the plastic that you can also push down and if you press both at the same time, you can remove the headrest.

Pull the seat fabric down in front to expose the plastic piece that the headrest bar inserts through. You will see a small wire clip inserted through plastic. Remove it by prying with small flat head screwdriver. Repeat on other side. Headrest will then slide out.

try putting a small screwdriver into the slots around the pole white ring on the bottom of headreat and pulling it out at same time. I would recommend two people doing this.

There should be tiny holes in the plastic covers at the base of the chrome rods attached to the headrest use a paper clip and push it in the holes as you pull on the headrest in the full up postion.

The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.

Look at the top of ur seat, between the two shafts of ur headrest. Beside one of the posts is a black plastic base on which one side has a button u push. That allows u to remove the headrest. U might have to jimmy side to side a bit as they are somewhat hard to remove at times, just do so with ur finger pushing the release mechanism.