I need the firing order & diagram on the distributer cap to the spak plugs

I have a straight six 4.0ltr grand cherokee jeep limited edition i have just changed the distributor cap and plug leads but sure if i have put them back correctly i have done in a clockwise order
1,5,3,6,2,4 is this the correct order

If your engine is a V6 I need to know the size to help you.

If its the V8 engine the firing order should be 1 8 4 3 6 5 7 2 in the order of rotation on the distributor (clockwise) Your model should have the # 1 marked on the cap and as long as no one has had the distributor out and put it back in a little off, It should be where its marked. If its not marked by the hold down for the wires to the cap, then (all things being correct) you should have the number 1 pointing towards the front. Number 1 normally points to the number 1 cylinder. On GM cars the furthest forward head is the Odd bank and the other head the Even bank. So the furthest forward bank would be 1 3 5 7 and the other side of the engine is 2 4 6 8.

I dont have a picture but this explination should help.
Hope this helps you get going again.