How do you put a 1992 isuzu rodeo back in time?

have the fault codes read
first then fix the faulty sensor

Isuzu Rodeo offers a lightweight V6 engine, push-button four-wheel drive, sturdy construction and lots of cargo space.--------------------------------------------------------------------------------
MaxiScan FR704 Code Scanner Reader

To clarify, if it turns over it cranks.
If you know it is not getting spark to the plugs, you will need to have someone check the rest of the ignition system including cap and rotor, module, and pickup coil in the distributor. (V6)
The first thing a mechanic would do is make sure the coil has voltage.

For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

For the 1992 Isuzu Rodeo
I do not know if you have the 2.6L SOHC In-Line 4-Cylinder or the 3.1L V6; however I have included both below.

For the 2.6L:
Firing Order:
1-3-4-2
Cylinders:
(back)
...4
...3
...2
...1
(front)
Ignition Coils:
(back)
1....2
3....4
(front)

For the 3.1L:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1996/make/isuzu/model/rodeo/1996_isuzu_rodeo_timing_belt_diagram_marks.htm

Yes, Isuzu used the chevy 2.8 liter V6 in its earlier models. Same motor found in the chevy Celeberty.

Tom

Most likely the 02 sensors will need to be replaced

Sorry for the severly delayed response....
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but am answering it in case you do.

Click on the following free, direct Link. It has all the Timing Belt Diagrams for your 1999 Isuzu Rodeo 3.2L DOHC V6 Engine and engine options (AC/No AC, etc.) you will need, complete with Instructional and Directional Diagrams to set your Timing.

Again my apologies...
Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/rodeo/1999_isuzu_rodeo_timing_belt_diagram_marks.htm

Here is your diagram. Good Luck and say thanks..lol http://www.2carpros.com/car_repair_information/tec_info/2000/isuzu/rodeo/2000_isuzu_rodeo_drive_belt_routing_diagram.htm