Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021
SOURCE: Installing serpentine belt for 2000 Lincoln Continental
Item
Part Number
Description
1
10300
Generator
2
8509
Water Pump Pulley
3
8678
Belt Idler Pulley
4
6B209
Drive Belt Tensioner
5
3A674
Power Steering Pump
6
8620
Drive Belt
7
19703
A/C Compressor
8
6312
Crankshaft Pulley
SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!
SOURCE: i need a diagram to replace serpentine belt on a
My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/1998/make/lincoln/model/continental/1998_lincoln_continental_drive_belt_routing_diagram.htm
837 views
Usually answered in minutes!
×