I need help inputting my radio code on a 95 e320

dealer for your code --need vin number and proof of ownership

• Radio Codes and advice are always available here

www.ukbookshelf.co.uk

• Mention FixYa Forum

You need to contact a Benz dealer and provide your VIN # to get security code for your radio

Its inside your car manual on the left side as you open it up, it'll be a lil grey card that will have the radio code written on it... read the manual and it'll tell you how to put the numbers in.

Contact dealer, they will verify its installed and not stolen then get you a code.

you must got to the dealer for a radio code for you benz. sorry

Usually the Mercedes dealer will give you the code if you are the owner of the vehicle and they might need the VIN# and sometimes the serial# on the radio too.

Disconnect and reconnect the battery again and try again.

Good Luck

that appears to be a camshaft position sensor performance code. you can start by checking to see if the sensor is working properly, re-check and make sure that the harness is ok by checking the resistance through the harness if all looks well there make sure the computer has the latest software on it by having it scanned at your local dealer. also you can check the reluctor wheel on the camshaft for damage or debris in the way of the sensor.

hope this helps!

Hello!
If you visit your local Mercedes Dealership with the title/Registration document they will have the code for you, provided it is the original Radio for the car.
There you Go!
FixYa'd
Good Luck!
Paul 'W'
Onyer~EDson(:0)~[>< U.K.